The Vism Expert Plate Carrier is a highly customizable plate carrier vest with many of the best features that you are looking for. The front and rear panel plate carrier compartments will accommodate the standard size and the newer larger armor plates up to 11 in x 14 in in size. The cummerbund also features side armor pockets to accommodate side armor plates up to 6 in x 8 in. The plate carrier has fully adjustable heavy duty nylon shoulder straps and large quick connect buckles to adjust how high or low the front and rear panels sit from the wearers shoulders. The cummerbund is adjustable in length from a medium to 2XL+ t-shirt sizes, up to a 51 in chest/waist size. The front, rear, and side panels all feature MOLLE webbing for customization of your plate carrier to what your mission requires. Fully compatible with MOLLE accessories like holsters, magazine pouch, and utility pouches. A very tough and well made plate carrier with reinforced double stitching in all the critical locations.
MOLLE webbing on the front, back, and side panels allows the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, etc.
Adjustable for length cummerbund with MOLLE webbing, can be extended out to 51 in L; Side pockets will allow for 6 in x 8 in side armor panels/plates
Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners
Top three MOLLE webbing rows on front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels;
Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas
Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor
Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing
The Vism Plate Carrier is a customizable plate carrier vest with many of the best features that you are looking for. The front and rear panel plate carrier compartments will accommodate the standard size armor plates. The plate carrier has fully adjustable heavy duty nylon shoulder straps and large quick connect buckles to adjust how high or low the front and rear panels sit from the wearers shoulders. It features hook and loop sections for attaching Department/ Unit patches, Name Tags, and Patches. Includes a Heavy Duty drag hand in the rear panel. The front, rear, and side panels all feature MOLLE webbing for customization of your plate carrier to what your mission requires. It is fully compatible with MOLLE accessories like holsters, magazine pouch, and utility pouches and is a very tough and well made plate carrier with reinforced double stitching in all the critical locations.
PALS Webbing for Easy Configuration
Heavy Duty Quick Release Buckles
Removable Shoulder Pads with PALS Webbing
Fully Adjustable Shoulder Straps
Durable Drag Strap on back and Heavy Duty D rings on the front
Designed and worn by members of I.C.E. units to hold armor plates and removable pouches. Complete with embroidered Police/ICE patches front and rear. Holds 8x10, 10x12 plates (not included). Black only
Designed for rapid deployment with ease of entry and added load carrying capacity. Front and rear plate carriers holds user's own plates, one grab handle, adjustable shoulder straps and quick release adjustable side straps for snug-to-body fit with minimum bounce. Rescue drag handle on back. One size fits all
Carrier will accept front and rear plates 10W x 12H x 1/2D. When cummerbund is worn without side plates, the empty pockets can carry your maps or other gear. Carrier and cummerbund have MOLLE webbing for attaching your pouches. hook-n-loop panel on the front and rear for service patches or name plates. Also includes a mesh lining for breath-ability and a rear drag handle.
Rothco's MOLLE Plate Carrier Vest is constructed of heavyweight 600 Denier Polyester and features MOLLE webbing that covers most of the vest, making it ideal for attaching modular pouches and accessories. Front and back internal sleeves for soft armor and plates measure 13.75" x 10.25" x 1". The tactical vest includes an adjustable/detachable cummerbund with pockets for side panel plates (plate & soft armor not included). In addition, the MOLLE plate carrier vest features adjustable shoulder straps with detachable pads, an emergency drag handle, padded mesh interior for breathability and quick release side buckles for easy removal. Rothco's MOLLE Plate Carrier Vest comes in two sizes: Regular (small - extra large) and Oversized (2xl-3xl).
The Lightweight Plate Carrier Vest from Rothco is not your typical plate carrier vest, weighing in at just over 1 pound this tactical vest offers superior weight savings, mobility, and ventilation for the user. The front of the tactical vest features three rows of MOLLE loop material, three pistol mag slots at the top center and three rifle mag slots both with elastic separators & elastic cord and hook & loop closures. In addition, the front features an integrated MOLLE system with three rows of MOLLE webbing for attaching MOLLE pouches and gear. The back of the vest features six rows of MOLLE webbing. A skeletonized MOLLE cummerbund system is designed to ensure optimal fit, minimal weight and added ventilation with three rows of durable plastic reinforced MOLLE webbing. The vest is fully adjustable with two elastic cords for attaching to the backside of the vest and 5"x5" panel with loop front and hook back. The shoulder straps are also adjustable with a soft material covering the hook & loop straps, and the straps are fitted with hook & loop tags for attaching a hydration hose. Both the inside front and back panels are equipped with a stretch mesh material for added comfort and ventilation. Rothco’s Lightweight Tactical Vest has stripped away the bulk of a typical tactical vest for an ultra-lightweight fit.
Rothco’s MultiCam MOLLE Plate Carrier Vest is made from U.S. licensed multi-cam 1000d cordura nylon material with an adjustable shoulder straps w/detachable pads, MOLLE compatible webbing covers most of vest, internal sleeves for soft armor & plate front and back (armor plates not included), adjustable/detachable cummerbund with pockets for side armor (armor plates not included), will fit up to 6" x 7" side panel plate, plate pocket measures 13.25" x 10.25" x 1", emergency drag handle, padded mesh interior, adjustable girth , hook & loop areas in front and back. Great for tactical, military or Airsoft use, additional colors including OD & Coyote are available as well.
Listen to Lyons Tactical Radio
Join host Ron Lyons and Brad Kaufman as they traverse the madern world of Tactical & Survival life.